What's New
Emcore OPTIVA Rack System.
http://www.emcore.com
|
Emcore provides their total optical transport solution with OPTIVA.
Fiber Optic Transport from Baseboard to 40GHz
1m to 100km via the OPTIVA Platform
3U 19″ Chassis
Dual Redundant Hot Swappable Power Supplies
16 Slows hot swappable cards
SNMP Management & Control
CARD TYPES:
Transmitters: IF, L, S, C. X, Ku, K, Ka, Utrawide bandReceivers: IF, L, S, C. X, Ku, K, Ka, Utrawide band
Redundancy Switching Units
RF Amplifiers
RF Splitters
Optical MUX & DEMUX
Optical Splitters
EDFAs
|
AMPHENOL FIBER SYSTEMS INTERNATIONAL - TFOCA-II Fiber Optic Modem
http://www.fibersystems.com
|
Amphenol Fiber Systems International (AFSI) offers the TFOCA-II® Fiber Optic Modem (FOM) to provide optical-electrical (O-E) and electrical-optical (E-O) conversion for harsh environments. This stand-alone unit features ruggedized optical transceivers integrated in a compact housing with 10/100/1000 Ethernet electrical interfaces (additional electrical interfaces available-consult factory) and AFSI's TFOCA-II® connector.
The "plug and play" unit allows systems engineers to effortlessly convert their systems to take advantage of the benefits of fiber optics without the need to design and develop harsh environment fiber optic transceivers and associated electronics. Additionally, the TFOCA-II® FOM's compact size significantly reduces the footprint devoted to O-E and E-O conversion using discrete components. The standard TFOCA-II® FOM performs conversion for 10/100/1000 (auto adaptable) Ethernet, providing up to 1.0 Gb/s transport over 10 miles using single mode fiber.
|
NOISE XT'S PHASE NOISE ANALYZER
http://www.noisext.com
|
Noise XT offers their NXA-26, 26.5 GHz Phase Noise Analyzer. THE NXA is a fully automated Phase Noise analyzer. Its dual channel architecture allows the system to use a cross-correlation process to cancel its internal noise floor.
A completely new user interface based on a large 14 inch touchscreen simplifies the operation, focusing the user on the measurement results itself and not on the measurement technique.
Please refer to their website for functional specifications and data sheets.
|
CASCADE MICROTECH - NEW CMI THERMAL SYSTEM FOR ELITE 300
http://www.cmicro.com/
|
The CMI Thermal System (formerly Espec) is now qualified for use with the Elite 300 platform. The part numbers are available to quote starting immediately. For a limited number of orders, Cascade Microtech is able to reduce lead times for these CMI Thermal Systems while inventory lasts. For example, an order placed by February 2009 with standard options and accessories could be shipped by the end of the quarter. To confirm availability, please contact Sales Support with lead-time requirements
|
|
|